- Scissors, a paper trimmer or a paper cutter
- Paper
- White Glue
- Printed mouth
- Printed eye
- Printed Minion logo
Step 5: How many Origami Pieces you need
This model is made from :
– around 27 white pieces ( this pieces are made from rectangles of paper with dimensions of 2.5 cm x 5 cm)
– around 344 yellow pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )
– around 246 blue pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )
– around 72 black pieces ( this pieces are made from rectangles of paper with dimensions of 6 cm x 9 cm )
Step 6: How to make an Origami piece
In order to do this, you can watch this
Instructable or you can follow this instructions:
- Take one of the squares and hold with the longer side on the bottom.
- Fold in half from the bottom to the top.
- Fold again from right to left but don’t press the fold very hard.
- Unfold the last fold and rotate the paper.
- Fold the right side of the paper to the bottom line in the middle then do the same to the left side. This should now look like an house.
- Turn over. Fold down outside corners.
- Fold the top 2 flaps down. You’ll end up with a triangle.
- Fold in half and you are done.
Step 7: How to make an origami base
After you finished to make the pieces, start assembling the base. For this you will need 48 pieces. You will notice that each piece will have two legs and two pockets.
- To assemble them you will put the leg of one into the pocket of another, but you must make sure to keep them alternating like bricks so that each new piece you put on is resting on two different pieces. So to put it another way, grab one piece and take the right leg and insert it into the left pocket of another piece. With the left leg of the first piece, place it inside the right pocket of a third piece.
- Continue adding pieces on top then on bottom until you have used all 48 pieces : 24 on the top row and 24 on the bottom row. Now that you have this line you must connect the two ends together so that you now have a ring.
Step 8: Build up the body.
Now this step is where things start getting really fun. Add 3 more layers on top of the first 2 layers that formed the base. Every row will need to have 24 pieces.
Step 9: Use special color patterns on the 6th row and 7th row, through the 12th row.
Take a look at the photo to understand how to put the pieces(or watch the video)
On the 6th row you neet to put this pieces in order:
– 5 yellow pieces
– 7 blue pieces
– 5 yellow pieces
– 7 blue pieces
On the 7th row you neet to put this pieces in order:
– 6 yellow pieces
– 6 blue pieces
– 6 yellow pieces
– 6 blue pieces
Continue like this until you have 7 rows that are made with yellow and blue pieces!
Step 10: 13th row – 24 blue pieces
On the 13th row you need to put 24 blue pieces!
Step 11: Continue with seven yellow rows!
Add 7 yellow layers.
Step 12: Continue with two black rows!
Add 2 black layers.
Step 13: Continue with 3 yellow rows!
Continue with 3 yellow rows!
Step 14: Glue the eye!
You have to make an eye or print one [ the circle it’s made with 27 white pieces ( 2.5 cm x 5 cm ) ]
Step 15: Glue the mouth and the logo!
Glue the mouth and the logo! Make them or print them!
Step 16: How to make the hands and legs
For one hand you will need 5 black pieces and 12 yellow pieces.
For one leg you will need 7 black pieces and 5 blue pieces.
Step 17: Stick the legs and the hands
Stick the legs and the hands like in the photos.
Congratulations! You have finished the Minion!
If you liked this project, share it with your friends!
DIY Instructables 